Moultrie camera won’t turn on or the camera won’t stay on.
Check the voltage on your batteries with a multi-meter. Each battery should be at least 1.5 volts. Sometimes batteries show a high percentage battery life, but if one of the batteries is lower than 1.5 volts, it could cause the power source to the camera to be weak. Also, make sure you are using the recommended batteries (Energizer or Moultrie Alkaline or Lithium)
Try a "Hard reset." To do this: (1) remove the batteries and the SD card from the camera. (2) With the batteries and SD card removed, please turn on the device (either use Quick Start or Custom Start modes) for one minute. (3) After one minute is up, turn the camera back off, insert the batteries and SD card and turn the unit back on.
If the above steps do not resolve your issue and your camera is still under warranty, you can get information on how to return your product, as well as fill out a return form, by clicking on the below link:
On the return form write your initials 01 on the top of the page as a warranty code.